A Little Work Now Can Save a Lot of Frustration Next Spring
Well, here we are again. The days are getting shorter, the temperatures are dropping, and another RC flying season is coming to an end.
For some pilots, that means putting their airplanes away until spring. Others will continue flying whenever the weather cooperates. And then there are those dedicated individuals who apparently believe frostbite is just another part of the hobby.
But whether you’re packing everything away for the winter or simply cutting back on your flying, now is an excellent time to give your aircraft some much-needed attention.
After months of flying, transporting, assembling, disassembling, and occasionally performing those less-than-perfect landings, our airplanes have earned a little maintenance.
Unfortunately, airplanes don’t repair themselves over the winter. That loose control horn, questionable battery, or small crack in the landing gear mount will still be waiting for you when spring arrives.
So before you put everything away, let’s go through an end-of-season maintenance checklist that can help make your first flights next spring a lot more enjoyable.
1. Start With a Good Cleaning
Before inspecting anything, give your airplane a thorough cleaning.
Glow-powered airplanes are particularly good at collecting oil and exhaust residue. By the end of the season, you may have enough accumulated grime to wonder what color the airplane originally was.
Use cleaning products appropriate for your aircraft’s covering, paint, foam, and other materials.
Pay particular attention to:
- The engine compartment and firewall.
- The underside of the fuselage.
- Landing gear and wheel assemblies.
- Hinges and control surface gaps.
- Battery compartments and equipment bays.
- Areas where exhaust residue or dirt has accumulated.
Cleaning isn’t just about appearance. Removing dirt and residue makes it easier to spot cracks, loose hardware, damaged covering, and other problems.
Just be careful not to force cleaning solutions or moisture into servos, receivers, bearings, or electrical connections.
The goal: Put away a clean airplane so you’re not discovering hidden problems underneath six months of accumulated grime.
2. Give the Airframe a Thorough Inspection
Now that everything is clean, it’s time to take a closer look at the airframe.
Start with the wings and fuselage. Check for cracks, damaged glue joints, loose covering, and anything that appears different from the beginning of the season.
Pay special attention to areas that experience the most stress.
- Wing attachments: Inspect wing bolts, mounting plates, joiners, and attachment points.
- Firewall: Look for cracks, loose mounting hardware, or signs of movement.
- Landing gear mounts: Check for damage caused by hard landings.
- Tail surfaces: Make sure the horizontal and vertical stabilizers remain securely attached.
- Control surface hinges: Look for looseness, damage, or separation.
- Covering and foam: Repair loose covering, cracks, or damaged areas before storage.
If you’re flying a helicopter, inspect the rotor head, blade grips, linkages, swashplate, tail assembly, and other critical components according to the manufacturer’s instructions.
Small problems can become major problems when an aircraft is subjected to flight loads and vibration.
And remember, just because that last landing looked pretty good from the pilot station doesn’t mean the landing gear agrees with you.
The goal: Find structural problems now, while you have plenty of time to repair them.
3. Inspect Servos and Control Linkages
One of the most important maintenance checks involves the aircraft’s control system.
After all, an airplane that looks beautiful but doesn’t respond properly to the transmitter isn’t going to remain beautiful for very long.
With the motor or engine safely disabled, inspect the control surfaces, servos, and linkages.
Look for:
- Loose servo mounting screws.
- Cracked or damaged servo arms.
- Bent or worn pushrods.
- Loose clevises or missing retaining clips.
- Damaged hinges.
- Binding or excessive play in control linkages.
- Unusual servo noises or jerky movement.
If you power the radio system for testing, make sure the propulsion system cannot start unexpectedly. Removing the propeller or mechanically disconnecting the motor where appropriate is a sensible precaution.
Move each control through its normal operating range and watch for hesitation, binding, or unusual movement.
Some digital servos normally produce a slight buzzing sound, but a new or unusually loud noise deserves investigation.
If a servo or linkage is questionable, don’t automatically assume it will be fine next season.
The goal: Make certain the controls are mechanically sound before the airplane goes into storage.
4. Electric Pilots: Take Care of Those Batteries
For electric aircraft, battery maintenance is one of the most important parts of winter preparation.
Lithium polymer batteries don’t appreciate being forgotten for months while fully charged or excessively discharged.
Before putting your LiPo batteries away, inspect each pack for swelling, damaged wiring, loose connectors, or other signs of deterioration.
Any battery showing physical damage or other unsafe conditions should be removed from service and handled according to appropriate battery disposal procedures.
For batteries in good condition:
- Use your charger’s storage function to bring each pack to the manufacturer’s recommended storage voltage.
- For many conventional LiPo batteries, storage voltage is approximately 3.8 volts per cell.
- Check individual cell voltages for significant imbalance.
- Disconnect batteries from aircraft and other equipment.
- Store batteries in a cool, dry location away from flammable materials and extreme temperatures.
- Use an appropriate fire-resistant storage arrangement and protect battery terminals from short circuits.
- Periodically check stored batteries during the winter.
Remember that different battery chemistries, including LiFe, Li-ion, NiMH, and specialty lithium packs, may have different storage requirements. Always follow the battery manufacturer’s instructions.
Don’t forget your transmitter and receiver batteries, either.
If you’ve got a collection of batteries that are several years old, winter is also a good time to evaluate their condition and decide whether any should be retired.
For more information, take a look at our earlier article, Winter LiPo Battery Storage Guide for RC Airplane Pilots.
The goal: Keep your batteries healthy, properly stored, and ready for safe use next season.
5. Glow and Gas Pilots: Protect Those Engines
Now let’s talk about those of us who still enjoy the sound and smell of internal combustion engines.
Whether you’re flying glow or gasoline power, proper engine storage can prevent some unpleasant surprises next spring.
Start by cleaning the engine and surrounding compartment.
Inspect fuel lines for cracks, hardening, swelling, or loose connections.
Check the fuel tank, fittings, filters, and clunk line where accessible.
For glow engines, corrosion protection is especially important because moisture and combustion residue can contribute to internal corrosion during storage.
Follow your engine manufacturer’s recommendations for removing residual fuel and applying an appropriate after-run lubricant.
Gasoline engines may require different storage procedures, particularly when it comes to fuel remaining in the tank and carburetor.
Depending on the engine and fuel system, the manufacturer may recommend draining fuel, using an approved stabilizer, or taking other specific steps.
Don’t assume the same procedure works for every engine.
Also inspect:
- Engine mounting bolts.
- Muffler attachments.
- Throttle and choke linkages.
- Fuel tank mounts.
- Ignition wiring on gasoline engines.
- Glow plugs or spark plugs where appropriate.
We’ve already covered this subject in more detail in our article, RC Engine Maintenance: Seasonal Shutdown Tips and Long-Term Storage.
It’s worth reviewing before putting a favorite engine away for several months.
The goal: Prevent corrosion, fuel-system deterioration, and unnecessary engine problems during winter storage.
6. Check Propellers, Spinners, and Landing Gear
Here’s an area that sometimes gets overlooked, especially when the airplane has been flying well.
Take a close look at your propellers.
Inspect for cracks, chips, stress marks, or other damage. Any propeller that shows questionable structural integrity should be replaced.
Check the spinner and backplate for damage, and inspect propeller adapters and mounting hardware.
If you’re using a folding propeller, inspect the blade pivots and mounting hardware according to the manufacturer’s recommendations.
Next, check the landing gear.
Make sure wheels rotate freely and that wheel collars, axles, and mounting hardware are secure.
Look for bent landing gear, loose retract mechanisms, and cracks around mounting points.
If your airplane has retractable landing gear, inspect the operating mechanism and repair any problems before storage.
The goal: Eliminate those little mechanical problems that can turn an otherwise normal takeoff or landing into something memorable.
7. Don’t Forget the Radio Equipment
Our modern radio systems are remarkably dependable, but they still deserve attention.
Inspect the receiver, antenna placement, wiring, and electrical connections.
Make sure the receiver is securely mounted and that antenna wires aren’t damaged or pinched.
Check connectors for corrosion, loose pins, and damaged insulation.
Inspect the transmitter itself, including its switches, gimbals, charging connections, and battery condition.
If you’ve made changes to your aircraft during the season, review its model memory and verify that the settings are properly documented.
For computerized transmitters, backing up model configurations is another worthwhile winter project when the equipment supports it.
Firmware updates may also be available, but don’t install them casually without reviewing the manufacturer’s instructions and compatibility requirements.
After any radio changes or updates, perform the appropriate setup verification and range check before returning the aircraft to flight.
The goal: Make sure your radio system is in good condition and avoid discovering configuration problems at the flying field.
8. Store Your Airplanes Properly
Once your aircraft are cleaned, inspected, and serviced, it’s time to find them a suitable winter home.
Where you store them can make a difference.
A damp basement, extremely hot attic, or garage with large temperature swings may not be ideal for every type of aircraft.
Whenever possible, choose a dry location with reasonably stable temperatures.
For balsa aircraft, prolonged moisture exposure can damage wood structures and covering.
Foam aircraft may be sensitive to excessive heat, pressure, or certain chemicals.
Consider these storage practices:
- Remove flight batteries and store them appropriately.
- Support wings and fuselages so they don’t become distorted.
- Avoid stacking heavy objects on aircraft.
- Protect aircraft from dust without trapping moisture.
- Keep airplanes away from direct heat sources.
- Inspect storage areas for signs of rodents or insects.
- Secure hanging aircraft properly so they cannot fall.
Yes, rodents deserve a mention.
A mouse may find your carefully arranged wiring and foam padding to be excellent nesting material. Unfortunately, the mouse doesn’t particularly care how much you paid for the airplane.
The goal: Keep your airplanes protected from environmental damage and unwanted winter visitors.
9. Give Your Field Box Some Attention
Now that the airplanes are taken care of, let’s look at the collection of equipment we drag to the flying field every weekend.
Our field boxes have a remarkable ability to collect things.
Old propellers, worn-out rubber bands, loose screws, broken connectors, and mysterious parts that nobody remembers purchasing.
Winter is a great time to clean everything out.
Check your:
- Battery chargers and charging cables.
- Electric starters and starter batteries.
- Glow igniters.
- Fuel pumps and fuel containers.
- Tools and spare parts.
- Propeller balancing equipment.
- Fire extinguisher and other safety supplies.
- First-aid supplies.
Inspect electrical connections and replace damaged equipment.
Store batteries and fuel containers according to their specific safety requirements rather than leaving them unattended in the field box.
And while you’re at it, throw away those broken parts you’ve been carrying around all season.
Unless, of course, you’re saving them for some project that you’ll definitely get around to someday.
We’ve all got a few of those.
The goal: Start the next flying season with equipment that actually works and tools you can find when you need them.
10. Make a Winter Repair List
Here’s one of the simplest maintenance habits you can develop.
Write things down.
If an airplane needs a new servo, replacement fuel tubing, covering repairs, or a battery, make a note of it.
Better yet, attach a small tag to the airplane describing what needs attention.
Something as simple as “Replace elevator servo before flying” can prevent an important repair from being forgotten.
If you’ve got several aircraft, consider maintaining a small notebook or spreadsheet listing their condition and maintenance needs.
Include:
- Aircraft name or model.
- Any problems discovered during inspection.
- Parts that need replacement.
- Repairs completed.
- Battery or engine maintenance performed.
- Items requiring inspection before the next flight.
It doesn’t need to be complicated.
The important thing is having a record of what needs attention.
Because while you might be absolutely certain you’ll remember that loose elevator linkage in April, there’s a pretty good chance you won’t.
The goal: Make sure nothing gets overlooked when the flying season starts again.
11. Take Advantage of the Winter Months
Just because the flying season slows down doesn’t mean our RC hobby has to stop.
Winter is an excellent time to work on projects that always seem to get postponed when the weather is nice.
Maybe you’ve got an airplane that needs recovering, a kit that’s been sitting on the shelf, or an engine you’ve been meaning to rebuild.
Perhaps it’s time to organize the workshop, improve your charging setup, or spend some time with an RC flight simulator.
Those winter projects can make the next flying season even more enjoyable.
And let’s face it, there are few things more satisfying than arriving at the field in spring with an airplane that’s ready to fly instead of one that’s still waiting for repairs.
Before That First Spring Flight
Even if you’ve done everything correctly before storage, don’t assume an airplane is automatically ready to fly several months later.
Before its first flight of the new season, perform a complete preflight inspection.
Verify the battery condition, control directions, control throws, fail-safe settings, and proper operation of the power system.
Complete the manufacturer’s recommended radio range check and confirm that any repairs made during the winter are functioning correctly.
For glow and gasoline engines, check fuel delivery and engine operation before takeoff.
Remember, a good winter maintenance program makes spring preparation easier. It doesn’t eliminate the need for a proper preflight inspection.
Final Thoughts
At the end of a busy flying season, it’s tempting to put the airplanes away and promise ourselves that we’ll take care of everything when spring arrives.
Unfortunately, spring has a way of arriving faster than we expect.
And when that first beautiful flying day comes along, the last thing anyone wants is to spend the afternoon repairing something that could have been taken care of months earlier.
A little cleaning, inspection, battery care, engine maintenance, and proper storage can go a long way toward keeping our aircraft in good condition.
Think of it as doing your future self a favor.
Because when the weather finally warms up, wouldn’t you rather be standing at the flight line with a transmitter in your hands than sitting at the workbench wondering why that engine won’t start?
Take care of your airplanes now, and they’ll be much more likely to be ready when you are.
How do you prepare your RC aircraft for winter? Do you have a particular maintenance routine, storage trick, or lesson learned the hard way?
Comments are welcome! Share your suggestions and experiences below. Your advice might save another club member some frustration when spring arrives.
Happy flying, enjoy your winter projects, and we’ll see you at the field!
York Area R/C Club
“`
